Open the app

3DMakerPro scan to a printable STL

Scans from 3DMakerPro scanners (Seal, Mole, Lynx and others) are exported from JMStudio as meshes. They often have open edges, small holes and noise that slicers don't like. Garbage to CAD cleans them up so they print first time.

Export from JMStudio

  1. Finish the scan and run the meshing step in JMStudio.
  2. Export the mesh as OBJ, STL or PLY. Point clouds can't be used: export the meshed model.

Make it printable

  1. Drop the file into Garbage to CAD.
  2. Set your printer's bed size (256 mm by default) and press Make printable.
  3. The part is closed into a solid, laid flat on its best side and checked against your bed. Big parts are split with alignment pins.
  4. Download STL or 3MF and slice as usual in Bambu Studio, OrcaSlicer, PrusaSlicer or Cura.

Scanned in metres?

Some exports come out in metres instead of millimetres. Garbage to CAD notices very small parts and scales them to millimetres automatically.

Open Garbage to CAD, free
More guides: Convert a 3D scan to STEP · Turn a 3D scan into a SolidWorks part · Fix holes in a 3D scan